Product Description

Product Description

Model

HJI T20

Battery

13S 20000mAH

Payload

20L

Spray width

4-5m

Dimension (unfold)

1430*1170*510mm

Speed limit

2-7m/s

Dimension (fold)

960*620*510mm

Flowrate

3.5L/min

Nozzles

2 centrifuge mist nozzles

Efficiency/hour

8-10ha/hour

1.No Survey or 3D Reconstruction Required in Complex Environment
·Autonomous flight on steep slope (<90 °). ·High trees' canopy layer following (10m). ·No survey required, high efficiency guaranteed.
2.Low Chemical Drift
·Operation height as low as 0.7m. ·Terrain following error<5cm. ·Speed: 5m/s. ·Ultra-low flight in high speed with low droplet drift.
3.Super-power System
·With high power intelligent charger, the battery can be fully charged in 18 minutes. ·Slow heating, quick cooling, no water-cooling required. ·Intelligent power management system makes it easy for maintenance. ·Long Battery Life,1000 charge and discharge cycles within warranty period.

Autonomous obstacle avoidance

·Avoiding fixed and moving obstacles in high speed,ensuring personal and flight safety

·No need to survey plots or mark obstacles, reducing preparation time
 

90 ° vertical obstacle avoidance

Independently identify and optimize routes

·Time saving: 20 minutes ·Efficiency improvement: 30%
Before upgrade: Overall range: 19435m Non spraying range: 5915m
After upgrade: Overall range: 13985m Non spraying range: 437m

·The 16kg drone, made of high-strength carbon fiber, can be carried by a single person
·Easy to fold and can be carried in a private car
·IP67, the whole machine is waterproof, dustproof and anti-corrosion. It can be cleaned conveniently and quickly after operation to prolong the service life

Application Scenario

CCMS System: Accurate, Efficient, Ambient-temperature Mist
Bimodal distribution: ·Transverse coarse droplets with good directivity ·Vertical fine droplets with strong penetration
·Adjustable droplet size ranging form 20 to 250 microns can meet different needs of crops ·Bimodal distribution of droplet size makes it suitable for canopy crops ·Real-time flow rate matching ·Balanced flow rate of nozzles ·Independent control of droplet size and flow rate ·The droplets will continue to diffuse for about 5-10 minutes

Multi scenario application – One drone is adapted to all crops

Support global OEM / ODM customization
Function/Appearance customization, as you wish

Global Cross-regional Sourcing
Avoid local being unable to use

Company Profile

Why Choose Us

1> Our supply is sufficient to guarantee the customers’ demand, Various of agricultural drones can guarantee the needs of most people.

2> Where you can buy the products you are interested in, at the meantime the customers can enjoy the long-term technical advisory services in our company.
3> We offer the OEM/ODM services for our products meet your special needs.
4> Our advantages and quick delivery, competitive prices, high quality and long term service to our customers.
5> There is a long-term cooperation with the shipping couriers, can make the goods more quickly and efficiently deliver.
6> We will provide best after sale service for the customers. You are welcomed to visit our factory and have some training for the Agricultural Drone after sale services. Anyway, we will try our best to meet your requirements.
7> We can offer the certifications that you need, and also help you to pass your official certifications.

Haojing International Trade Co., Ltd.

Haojing International Trade Co., Ltd. is a well-known manufacturer in China for many years. Our factory was established in 2003.

Our products include UAV, UGV,UAV parts, etc. Our products have passed ISO certification and CE certification and patent certificates.

Our company iscommitted to providing global customers with high-quality mechanical and electrical products and complete sets of solutions, andproviding one-stop procurement services.
We conforms to market demand, takes technological innovation, customer first, and good quality as our concepts, based on ouractive actions and hard work, opened overseas markets successfully.
At present, we have an extensive sales network with customers all over the world, including the United States, Mexico, Russia,Portugal, Turkey, Pakistan, South Korea, Japan and Indonesia. Our products have covered distributors and agents in all Europeancountries.
Our main manufacturing plant is located in ZheJiang , China, with a stable and highly skilled labor force. We are willing toprovide you with unique products that are not only attractive, but also practical and competitive.
We know for a company to develop an enviable reputation,it needs to do much efforts so that favor to the needs of differentclients. We are in trying its best effort to play a pivotal role in this field. Waiting for more cooperation partners to join us.

Packaging & Shipping

FAQ

1. Who are we? We are an integrated factory and trading company, with our own factory production and 65 CNC machining centers. Our customers are all over the world, and we have expanded many categories according to their needs.  
2. How can we guarantee quality? We have a special quality inspection department before we leave the factory, and of course it is very important that we will strictly control the quality of each production process throughout the whole production process, so our products can reach a 99.5% pass rate.  
3. What can you buy from us? Professional drones, unmanned vehicles and other devices with high quality.  
4. Why should you buy from us not from other suppliers? We have 18 years of production, R&D and sales experience, and we have a professional after sales team to support you.  
5. What services can we provide? Accepted Delivery Terms: FOB,CIF,EXW,FCA,DDP; Accepted Payment Currency:USD,EUR,CNY; Accepted Payment Type: T/T,L/C,D/P D/A,Credit Card;

 

Types of agricultural parts

Agricultural parts can be divided into different categories. These components include tractors, moldboard plows, whips and sickles. Some of the different types of agricultural ingredients are listed below. Each of these parts is important for different types of farming. It is important to know the purpose of each and what it does. If you are a farmer or plan to become a farmer, these parts are critical to your operation.
agriculturalparts

Tractor

The first tractor appeared in the 1920s. Ford and International Harvester were among the first companies to produce farm tractors, but the industry has grown rapidly. By the 1920s, hundreds of companies were producing farm tractors. The agricultural depression of the 1930s forced many of these companies out of business. By the 1930s, only 7 companies were major players in the tractor business. Ford produced the largest number of wheeled tractors in the United States between 1930 and 1955.
Some tractors are equipped with various accessories to enhance their performance. These specialized agricultural components are used for a variety of tasks. These include tillage, harvesting, planting and material handling. Tractors vary in horsepower, lift capacity, control and capabilities. Some models also have device mounting options. The downside of this is that if you need to use the tractor for other purposes, you will have to use additional attachments that can damage the tractor.
Modern tractors have a clutch pedal on the gear lever. This allows you to shift quickly without pedaling. Other tractors have a throttle speed button that improves hydraulic flow to the implement. However, the most important component of a tractor is the engine. Tractors must be driven safely because even minor accidents can cause serious damage to farm equipment. While there are many tractors that can operate without these parts, you can find the right tractor for your job.

Shared plows

One of the many uses of shared plows as part of agriculture is to increase the amount of soil in a field. This plow effectively removes compacted soil and lifts weed roots. According to the University of Nebraska-Lincoln Institute for Agriculture and Natural Resources, plowshares are best used in the fall, when weeds are less active and the soil is more fertile.
The basic plowshare can be adjusted by raising or lowering the plowshare to suit runners in the furrow. However, this design is not suitable for breaking up the heavier soils of northern Europe. In the 6th century, however, the advent of the wheel made it possible to use larger moldboards, which increased food production and population growth. Today, farmers in North America have access to a wide variety of moldboard plows.
Agricultural moldboard plows come in 2 basic styles, horse-drawn or tractor-style. Horse-drawn models have 1 bottom, while tractor-pulled moldboard plows have 1 to 14 hydraulically raised bottoms. Other variants include intermediate breakers and twin moldboard plows. Agricultural moldboard plows are often used in the Midwest and elsewhere.

Grass

Grass is used for mowing. The blade is double edged and bolted to the wooden handle. Steel blades are tempered and braced for strength and durability. The blade can be sharpened if necessary. The straw whip is 30 inches long, which can be a good or a bad thing depending on the user’s height. Blades can be sharpened with sandpaper or a file.
The traditional straw whip 32 includes a rear panel and horizontal shelves. It also features a hollow handle with an adapter at the proximal end and a carrying handle at the distal end. The first cable goes to the power supply and goes through the case and handle. After pulling the cable taut, the straw will be firmly attached to the small holder 8.
The suction tube 32 is connected to an electrical connection 47 that powers the device. A battery pack is provided for use away from the tractor. It is a plastic or metal box and consists of 2 parts: a rechargeable battery 67 and a female electrical plug 68. The switch locks in the open position to prevent accidental use. The switch is also equipped with a safety lock button. These 2 components work together to operate the straw.
agriculturalparts

Scythe

Although it is generally believed that the scythe was first developed in Roman times, its actual development may be earlier. Pliny mentioned 2 different types of sickles, Gallic and Roman. The Gallic sickle was the longer of the 2 and was made of mild steel, while the Roman sickle was made of harder, higher carbon steel.
In the past, people cut wheat by hand with a sickle. They replaced scythes and bagging hooks, which required users to bend over to harvest crops. Although they have largely been replaced by tractor machinery, scythes are still used today in parts of Asia and Europe. The sickle can also reach awkward corners, making it more useful in certain types of cuts.
The sickle belt stretches from Europe to the Middle East and the Midwest of the United States and Canada. It also spans most of Russia, the Middle East and North Africa. In the 19th century, Austrian sickle makers dominated the sickle industry. They produced millions of sickles, some dating back to the 1500s. Some of them were exported to India and the former Soviet Union.

Brushcutter

Brushcutters are powerful agricultural tools used primarily for felling and trimming vegetation. These parts are often multifunctional, and some models are even capable of maintaining road edges and ditches. Some models can even trim branches from certain types of trees. Before you buy your own brush cutter, be sure to read the manual carefully and follow the safety rules. For your own safety and the safety of others, please wear a hard hat, eye and hearing protection, padded gloves, long pants, and boots, and keep young children away from work areas.
Brushcutters are usually attached to the tractor via a 3-point linkage system, with the exception of high reach models that are attached to the tractor via fixed stirrups. Additionally, brush cutters often have a balancing mass located opposite the tractor. These agricultural components are complicated to install, but once installed, they remain coupled to the tractor. A brush cutter is a critical piece of equipment on any tractor.
Most brushcutters use hydraulic engines. The power is transmitted mechanically through a PTO (power take-over) mechanism or a cardan shaft, which turns a hydraulic pump. This pump draws hydraulic oil from a special tank and then sends it through a series of distributors to move the arm and the working organ. As a result, the power of the brush cutter is transferred from the tractor to the working organ by a hydraulic engine.
agriculturalparts

Transplanters

Transplanters for agricultural parts are equipment used to plant seedlings into soil. These machines are used in greenhouses and open fields to increase productivity, yield, and the success of harvesting transplanted crops. Transplanters are typically made of steel and are designed to fit seedlings of all shapes and sizes. Buying a used transplanter is a good idea as long as the working parts are in good condition. When considering a used model, you should inspect it for cracks or corrosion and broken parts.
A mechanical transplanter works faster than hand transplanting, but it becomes slower as your quads and back start hurting. Water-wheel transplanters have become popular in recent years. By automatically delivering water into the holes where the transplants are set, water is delivered to the root system without the need for manual intervention. Moreover, water-wheel transplanters save time on watering. John Good, a farmer who uses a water-wheel transplanter, says that speed is no different between a mechanical transplanter and a water-wheel one.

Cultivatorsw

The basic purpose of cultivators is to turn soil and plant matter into a workable form for the crops. Cultivators are used by both large and small farmers. Cultivators for small farming operations are usually self-propelled, but may be drawn behind a tractor. Two-wheel cultivators are typically fixed and powered by couplings, while four-wheel cultivators are attached via a three-point hitch and operated by power take-off. Some cultivators are still drawn behind a draft animal, and the methods are still used in many developing countries.
Cultivators are used in farming to break up soil around a crop. There are 3 different kinds of cultivators: row crop cultivators, disc cultivators, and power cultivators. Row crop cultivators are used to break up soil before planting, while harrows are used to prepare the soil for planting. In both cases, cultivators are used to disturb the soil consistently throughout the working width. In general, cultivating soil improves aeration and disrupts photosynthesis. Moreover, it can decrease water ponding time after heavy rainfall.
Cultivators are important parts of agricultural machinery. They aerate soil, prepare the seedbed, and kill weeds. By disrupting the soil, cultivators are used to evenly distribute chemical applications. Among them, glyphosate is the most common and widely used weed killer. It is safe for farmers to use, and it effectively eliminates most weeds in a single application.

China factory Haoyi New Technology Anti-Interference All-Terrain IP67 Waterproof 20kg Agri Agro Mini Agricultural Sprayer Drone Uav     with Free Design CustomChina factory Haoyi New Technology Anti-Interference All-Terrain IP67 Waterproof 20kg Agri Agro Mini Agricultural Sprayer Drone Uav     with Free Design Custom