Product Description

HIGH QUALITY HYDRAULIC HOSE CRIMPING MACHINE 
                                       RS-91C

                 High power   High quality     Low noise
                          We are responsible for the products !

Product description          
 

Product Name

Hydraulic Hose Crimping Machine

Type:

RS-91C

Crimping range:

4-87mm

Color

BLUE

Standard Die Set:

10 Sets

Voltage&Motor:

220V/3KW

Opening without dies:

Φ122mm

Open time

≤1.5s

Hydraulic oil:

Summer: YB-N46; Winter: YB-N32

Oil box:

65L

Pump:

14.5L/min

System Pressure

30Mpa

Outside Size(MM):

800*635*1376mm

Weight (KGS):

310

 
                                      Details decide everything !
                                                       1. “Quality is our culture!”
                                                    2. “With us your money in safe!”
                                                3. ” Time is gold” for you and for us.
                                             4. “Quality is the soul of an enterprise!”

Standard die of RS-91C

NO. Name Die bore Die length 
1 6 Φ15 65mm
2 8 Φ18 65mm
3 10 Φ20 65mm
4 13 Φ23 65mm
5 16 Φ26 65mm
6 19 Φ29 65mm
7 25 Φ37 65mm
8 32 Φ46 78mm
9 38 Φ51 78mm
10 51 Φ63 78mm

Production Line                     

We have a strict line of production and strictly control every process.
(A) for  raw material, we will check again by our inspector as per international standard. Only the raw material reach to international standard and allow enter our facotry. 

(B) for hydraulic and eletrical parts, such as valve, pump, motor and so on, we use famous brand both from China and abroad.However, we will check again when these parts enter our facotry. 

(C) before the hose crimping machine enter our warehouse, the inspector check the machine roundess, taper, opening, speed, noise, apprance and so on. Only each parts is up to standard of ISO, CE standard, the machine can enter the warehouse. 

(D) when the machine package, the inspector the dies, the package and other parts of clients requriment. Everything is ok, the inspector signed and machine allow to go out the facotry

High quality control and Accurate product test !

Packing & Delivery                  

Packing Details  : Packed by Wooden Case
Delivery Details : 3-30 days after order confirmed.
Careful packing and Ensure that the goods are arrived at destination in good condition

Buying Xihu (West Lake) Dis.s                               

Company information                 

HangZhou Rising Rubber Co., Ltd
RISING RUBBER, as a professional manufacturer and exporter with experience of 10 years, offers a broad range of Hydraulic Hose, Air Hose, Fuel Hose, Suction & Discharge Hose, Sand Blasting Hose, various PVC Hoses, Fittings and relative products to suit different types of applications.

1. “Quality is our culture!” We have Germany High Technology High Speed Braiding Machines and comprehensive laboratory offering inspection from raw material to finished products.
2. “With us your money in safe!” Full refund of bad quality or delay of delivery time. Trade Assurance System 94 000$ guarantee for your order.
3. ” Time is gold” for you and for us. We have professional team work who can make nice quality in short time.
4. “Quality is the soul of an enterprise!” We had the honor to serve importers and distributors from Europe and America. 

related product               
We have full series of HYDRAULIC HOSE, including:
Wire braided: SAE R1/DIN EN 1SN, SAE R2/DIN EN 2SN, SAE R16, SAE R17
Wire spiral: SAE R9, R12, R13, DIN EN 4SP, DIN EN 4SH
Textile braided: SAE R3, SAE R6, SAE 5
Thermoplastic: SAE R7, SAE R8

INDUSTRIAL HOSE
Air hose–WP 20 bar/300 PSI, BP 60 bar/ 900 PSI. 50-100M per roll.
Water hose–WP 20 bar/300 PSI, BP 60 bar/ 900 PSI. 50-100M per roll.
Suction hose–Water suction hose, water discharge hose, oil suction hose, oil discharge hose.
Sand blast hose–High abrasion resistant tube.
Welding hose–Oxygen hose, Acetylene hose, Propane hose, Twin hose

PVC HOSE
PVC Steel Reinforced Hose–for water suction and conveying.
PVC Fiber Reinforced Hose–For food grade liquid.
PVC Helix Suction Hose–plastic spiral reinforced.
PVC Garden Hose–for home and agriculture usage.
PVC Layflat Hose–agriculture irrigation and industry watering.

HOSE FITTINGS
HOSE PROTECTOR
SILICONE HOSE
RADIATOR HOSE

FAQ ( Frequently Asked Question)                                         
1. Is sample available? Shall I pay for sample or delivery?
Free samples and free delivery. 

2. How long will I get my order?
We will arrange shipment within 7 days after payment. 

3. How will my order be packed? 
wooden case
Careful packing and Ensure that the goods are arrived at destination in good condition

4. What should I do if I find quality problem in using?
12 months Quality Garentee for all of our products. We offer replacement for any defective caused by non-human reasons.

5. Is it possible to visit your factory?
We warmly welcome you to visit our factory at any of your convenient time.

6.what king of rubber hose do you have?

RISING RUBBER, as a professional manufacturer and exporter with experience of 10 years, offers a broad range of Hydraulic Hose, Air Hose, Fuel Hose, Suction & Discharge Hose, Sand Blasting Hose, various PVC Hoses, Fittings and relative products to suit different types of applications.

shoud any item draw your attention,ple let me know.

Contact us           

HangZhou RISING RUBBER CO.,LTD
Room 718, No. 658 HangZhou Road, E&T dvp zone, HangZhou, China
Tel: -532-8098 5516
Fax: -532-8098 5517

 

Advantages of Ball Screws and How They Can Benefit Your Applications

When selecting a ball screw for your application, there are several factors to consider. This article will discuss high mechanical efficiency, low friction, multiple repair options, and application requirements. Choosing the right ball screw can help you get the job done quickly and effectively. To make your decision easier, consider the following tips. Read on to learn about some of the advantages of ball screws and how they can benefit your applications. Here are some of the most common types:
air-compressor

High mechanical efficiency

The mechanical efficiency of ball screws can be measured using the axial load test. The axial load is equal to 0.5 x FPr / 2Fpr. The elastic deformations are measured as DL1 and DL2, respectively. Common engineering procedures work at 90 percent reliability; however, certain sectors require higher reliability, which has a direct impact on the dynamic load capacity. The axial load test is 1 of the most widely used methods to determine the mechanical efficiency of ball screws.
In order to achieve high translation, ball screws must be designed with high stiffness and positioning accuracy. In addition, high preloads increase the initial driving torque and cause more friction and heat. Other important design criteria include low driving torque and reduced slip motion. This means that the high translation capacity of ball screws must be well matched to the overall application. The following are some common design criteria for ball screws. You can select the best type of ball screw for your needs.
The high mechanical efficiency of ball screw is achieved by avoiding the common sag and pitch problem. The ball track design helps to reduce the centrifugal force. The ball screw’s diameter can be adjusted by adjusting the centre pitch of the nut on 2 ball tracks. The nut’s axial load is also adjusted through the offset centre pitch. This method allows the users to increase the mechanical efficiency of ball screw by up to 40%.
When calculating the mechanical efficiency of ball screw, consider the application’s environment, speed, and other factors. If the application requires precision and accuracy, then the ball screw is the right choice. The engineering department of a ball screw manufacturer will carefully review the application factors and come up with a design that meets the application’s expectations. Moreover, some manufacturers even offer customized ball screws, which can be tailored to your requirements.

Low friction

The operating performance of a low-friction ball screw is characterized by its minimal friction. This screw has a structure that transmits forces through rolling steel balls. The torque is calculated by calculating the load and the lead screw’s dimensions. This type of screw can be used for a variety of different applications, including hydraulic systems. Read on to learn more about this type of screw and how it can help you build a more reliable and durable car.
The critical speed of a ball screw is higher than that of a lead screw, so this type of screw can accommodate larger loads and speeds. It also has a lower friction coefficient, which reduces the amount of heat produced. High-quality ball screws can withstand longer duty cycles than standard lead screws. However, in order to compare the two, you must take into account the duty cycle. Low-friction ball screws are more durable than lead screws, and the duty cycle is only 1 of the factors you should consider when selecting them.
The ball bearings are the most prominent component of a low-friction ball screw. Their main function is to reduce the friction between the nut and the shaft. Without them, the friction would be too high. This feature is possible thanks to the ball bearing’s groove profile. Two arcs intersect at the contact points on the shaft and nut. Consequently, the ball bearing reduces friction in a way that is essentially non-existent without the bearing.
The mechanical efficiency of a low-friction ball screw is very high. The typical ball screw is up to 90% efficient, but some types can reach a higher efficiency. They are commonly used in machine slides, presses, and linear actuators. The high efficiency of a low-friction ball screw makes it a great choice for many different applications. This type of screw is made of several main components. The ball bearings provide the helical raceway for the ball assembly and threaded shaft is the screw part. The ball screw is comparatively more bulky than a conventional leadscrew, but the overall size is smaller than its lead counterpart.
air-compressor

Multiple repair options

A damaged ball screw will typically display visible physical signs, including noise or vibration. Additionally, worn ball screws will require more horsepower and torque to operate. They may also cause lead accuracy issues. Luckily, there are multiple repair options for ball screws. You can get new ball screws to restore preload and reduce backlash. But there are some warning signs to look out for first. Keeping a close eye on your ball screw’s health can help you avoid a costly replacement.
Look for a ball screw repair company with a proven track record of servicing all types of ball screws. The service should offer a free evaluation and 3 types of service: reload, recondition, and replacement. Reload is the simplest option and involves cleaning and polishing the screw and ball nut. Reconditioning or replacement, on the other hand, requires new parts. Choose the 1 that offers the best value for your money.
EP offers an emergency service and superior service for your ball screws. Their UK service includes delivery and international shipping. All ballscrew repairs are covered by a full service warranty, and the company is known for providing competitive pricing. If you do need a ball screw repair, look no further. Contact K+S today to discuss your specific needs. You’ll be glad you did. You’ll save up to 70% over purchasing a new ball screw.
While ball screw repair is an easy and inexpensive option, it may be necessary to have it replaced more frequently than the usual. In addition to replacing worn ball screws, you may need to consider a different type of repair. This process involves grinding the ball nut and journal diameters back to their original size. Fortunately, level 4 is the most expensive but can restore a screw’s lifespan. This is also the most extensive type of repair available for a ball screw.

Application requirements

A ball screw is an efficient solution for precision motion control in many applications, including automotive and aerospace. These screw-type devices are highly resistant to corrosion, and the alternating steel-ceramic architecture ensures extreme reliability and sturdiness. For the aerospace sector, a ball screw replaces the typical hydraulic system, and the product is used in wind turbine blade pitch and directional position, solar panel movement, and gate control in hydroelectric stations. Ball screws are also used in motorised inspection tables, step photolithography machines, microscopic integrated circuits, and many other applications.
The most critical requirements for a ball screw assembly are backlash and bearing support. Backlash is the amount of axial motion between the screw and nut, which leads to positioning errors. Although this axial motion is minimal, it can be as little as 70um. If the preload is too large, a ball screw may suffer from excessive heat. Depending on the application, the amount of preload required can be adjusted to maximize the overall performance of the device.
The choice of screw is determined by the load capacity. For example, plastic nuts are commonly used for light loads, while bronze nuts are used for loads that weigh several thousand pounds. Lead screws are not particularly reliable in situations where load requirements are extremely high, and a ball screw will often be a better option. The lower friction of a ball screw allows it to withstand higher duty cycles than a lead screw. When the load requirements exceed lead screws’ capacity, a ball screw is the better choice.
A step photolithography machine is another example of an application where ball screws play an important role. This device helps manufacturers produce microscopic integrated circuits by harnessing the reaction of light. A stepper is a critical piece of this machine, as it controls the positioning of light exposure on the silicon wafer. High precision is required for this application. Ultimately, a ball screw will make the process easier. Its proven record for meeting instrumentation requirements is an excellent example of its value in the laboratory.
air-compressor

Cost

The global market for ball screws is growing at a steady pace, but what drives the growth? In the ball screw industry, performance, cost, and analytical predictability are the primary concerns of OEMs. This market study provides in-depth analysis of these market dynamics. You’ll learn how to best compete in the global market for ball screws. Here are some tips to help you get started:
Ensure you have a good grasp of the differences between lead and ball screws. The cost of lead screws depends on their efficiency, and some of them can achieve C5 level accuracy. However, ball screws are more durable and more repeatable. Besides, lead screws can’t achieve high precision because of their sliding motion, which gradually grinds away the accuracy. As a result, the cost of a ball screw is more than compensated by the improved performance of OEMs.
To get the best price for ball screw, look for a manufacturer with a strong technical force. Most of these manufacturers have sophisticated equipment and strict quality control systems. They draw inspiration from the requirements of the market and have continuously increased their technological content to stay ahead of the competition. If you’re in Pune, look for a manufacturer with this technology. It won’t be difficult to do business with such a supplier. The company will also provide you with contact information, including their office address and phone numbers.
When choosing between lead and ball screws, you need to understand how they work and why they’re more reliable. Ball screws are more durable than lead screws, which is 1 of the primary reasons for their popularity. Lead screws, on the other hand, are often used for vertical applications. Lead screws tend to be cheaper than ball screws, but they have more limitations. When used properly, however, they can increase the life and performance of machines. In general, they’re corrosion-resistant and offer great design flexibility.

China best High Pressure Hydraulic Hose Crimping Machine     near me factory China best High Pressure Hydraulic Hose Crimping Machine     near me factory